Delfin德风 DM3/100吸除固体物质，液体和灰尘的工业吸尘器
Industrial vacuum cleaner for dust, liquid and solid material
型号 | | DM3/100 |
电源电压 Voltage | 伏 V. | 230 (110) / 50-60 |
旁路马达 By-pass motors | N. | 3 (单相) |
功率 Power | 千瓦/马力 KW/HP | 3,4 4,6 |
真空气压* Max vacuum rate | 毫米水柱 mm.H2O | 2.300 |
排风量** Max Air flow | 立方米/小时 M3/h | 600 |
过滤网面积 Filter Surface | 平方厘米 cm2 | 20.000 |
过滤网种类 Standard filter efficiency | 级别/ 微米 CAT BIA/Micron | L / G 3 |
过滤网透风量 Air load on filter | 立方米/平方米/小时 M3/M2/h | 300 |
集尘箱容积 Capacity | 升 Lt. | 100 |
吸尘口 Suction inlet | ? | 80 |
噪音度 Noise level | 分贝 dB | 78 |
绝缘 Insulation | 级别 CI | 1 |
尺寸 Dimensions | 厘米 mm | 62 x 62 |
高度 Height | 厘米 mm | 160 |
重量 Weight | 公斤 kg | 80 |
*关闭吸尘口测量 Measured with fully closed inlet
** 打开吸尘口测量 Measured with fully open inlet
干湿两用配套件 Wet&dry kit ：
吸尘系统 Suction Unit
吸尘系统是三个单相旁路电动马达，使用碳刷，在钢制外壳上有独立的操作开关。马达上有降低噪音的材料，另外有个朝向地面的排气管，这样就不会影响操作者，也不会把周围的灰尘扬起。控制面板上有三个独立的开关和一个真空指示器，可以避免过滤网堵塞。马达两边有把手，可以轻松装卸，查看替换过滤网也很方便。
The suction is provided by three by-pass motors, using carbon brushes, operated by independent switches and placed inside a sturdy steel casing . The motor head is filled with noise reducing material, in order to limit as much as possible the level of noise, and designed in order to convey the exhaust air towards the ground, so as not to bother the user and not to raise possible dust in the neighbouring area. The control board includes the three independent switches and a vacuum indicator, useful to detect possible clogging of the filter. Two handles placed on the sides enable an easy lifting and removal of the motor head, for possible inspection or replacement of the underlying filter.
过滤系统 Filter Unit
由聚酯制成的过滤网安装和保护在钢铁过滤桶里，以星型形状裁剪，从而增加了过滤网的表面（20000 cm2）并且具有高过滤功效（3 微米）。手动震尘器使用户上下摇动来清洁过滤网，让大部分灰尘掉落保持过滤网干净，这样能够延长它的使用寿命和确保吸尘功效。前部铝质以印模压铸的吸尘接口（直径80 毫米）放置在过滤网下面，因此不用取出或更换过滤网就可以同时灰尘和固体、液体等物质（后者只能在集尘箱容积的范围之内）。
The filter is placed and protected inside the steel filter chamber; the filter is made of polyester, tailored with pockets in order to increase the filter surface (20.000 cm2), and has a high filtration efficiency (3 micron). A manual filter shaker enables the user to clean the filter efficiently, by a vertical shaking movement, so as to detach most of the dust and maintain the filter clean, in order to increase its life and maintain the suction performance of the machine. The frontal aluminium die-cast suction inlet (?80 mm. diameter), placed below the filter, makes it possible to vacuum at the same time dust, solid and liquid material (the latter only within the capacity of the container), with no need to change or take out the filter
集尘系统 Collection unit
被吸的物质都落在带轮子的集尘箱里（100 升），从而可以方便安全处理被吸的物质。如果需要，可以直接收集到垃圾袋里。
整个机器安放在坚固钢铁底盘上，带两个旋转轮子，其中一个有制动装置，所有金属部件都是环氧喷漆的。
The vacuumed material is placed inside a drop-down bin mounted on wheels (75 litres capacity), which makes it possible to dispose easily and safely of the sucked material, if need be collecting it directly into a plastic bag.
The vacuum is mounted on a sturdy steel chassis with two pivoting wheels, one of which with brakes; all metal parts of the vacuum are epoxy painted
